利用单参数Lie群组的一种可解性求自治系统首次积分的方法

讨论了自治系统接受的单参数Lie群组具有一种可解性的情况下求系统的一个首次积分的具体方法.对于n阶自治系统,给出相应参数的一组确定取值,求得系统首次积分；对于三阶自治系统,当系统接受的单参数Lie群组可解时,验证求得首次积分的条件一定成立.     

Progresses and advances in Arctic underwater acoustics study

As a part of underwater acoustics, the study and development of Arctic Acoustics is later than underwater acoustics about several hundred years. After World War II, the study of Arctic Acoustics attracts many interests by some developed countries, especially U.S. and pre-Soviet Union. The research works obviously have some kinds of cold war brand. After the Cold War, with the gradual warming trend of Arctic area, the ocean acoustic environment in Arctic and its adjacent area have been considerably concerned. The 8 countries of Arctic rim organized exclusive "Arctic Council" in 1996. The white paper of "China Arctic Policy"was published in January 26, 2018, the Chinese government declared that China is a close Arctic country, and is the responsible stakeholder of Arctic interests. The new advances in Arctic research works axe introduced in this paper, including the results of scientific survey and studies about Arctic underwater acoustics of Chinese researchers. It is showed that the Arctic underwater acoustical research area is not only parallely copy the topics what traditional underwater acoustics covered, e.g. environment noise,reverberation,and propagation, but also the topics which is specifically based on the Arctic environment. Some of these research fields cannot be included in the traditional shallow water, deep water acoustics, e.g. the ice-water interface feature, ice covered semi-acoustic channel effect, the communication and navigation of UUV in the condition of under ice, and the adaptation of sonar technique, equipment in the ice-covered environment, etc.     

基于LIBS及时间分辨特征峰的激光除漆机理研究

激光除漆是一种高效、清洁的新型清洗技术，对激光除漆物理过程和机理的研究是该技术发展的关键。基于LIBS技术，测量得到油漆去除过程中等离子体的发光光谱，计算出油漆样品去除前后等离子体的电子密度和温度，研究了油漆中特征元素对应的光谱特征峰强度随时间的变化情况。结果表明，随着激光作用脉冲数量的增加，油漆去除深度逐渐增加，等离子体电子密度和温度在将漆去除干净的最后几个脉冲作用时呈下降趋势。油漆中Ti元素的所对应的特征峰信号持续时间为2个μs，油漆去除前后信号强度呈现跳跃减少，该现象可用于快速、准确、实时的判断油漆去除情况。     

新辅助化疗在软组织肉瘤治疗中的应用分析

目的研究并探讨新辅助化疗在软组织肉瘤治疗中的应用效果。方法选取2013年1月—2016年6月期间甘肃中医药大学临床医学院收治的软组织肉瘤共80例作为研究对象,采取单盲随机分组法随机分为对照组和观察组各40例,对照组实施手术治疗,观察组在手术前实施新辅助化疗,比较两组患者的保肢率、治疗效果、术后半年复发情况。结果观察组患者的保肢手术率为77.50%,对照组患者为55.00%,差异具有统计学意义(P0.05);观察组患者的治疗总有效率明显高于对照组(P0.05);术后半年随访发现,观察组的复发率明显低于对照组(P0.05);观察组患者在新辅助化疗期间未出现严重的不良反应。结论在软组织肉瘤患者行手术治疗前实施新辅助化疗,可提高患者的保肢率,提高治疗效果,减少复发,有利于改善预后。     

D*-度量空间广义弱压缩映射的不动点定理

介绍了D^*-度量空间中的相关知识, 并基于D^*-度量空间, 将度量空间中与两种距离控制函数(ψ,?)有关的广义弱压缩映射推广到D^*-度量空间, 通过构造迭代序列，讨论了广义弱压缩条件下映射不动点的存在性和唯一性, 给出了几个不动点定理, 所得结果丰富了D^*-度量空间的不动点理论。     

氢化物发生-原子荧光光谱法测定金属镁中痕量铅

样品以盐酸、过氧化氢进行溶解,以铁氰化钾作氧化剂,用氢化物发生-原子荧光光谱法测定金属镁中痕量铅。研究了氢化物发生的介质和酸度、硼氢化钾溶液的浓度、氢氧化钠的浓度、铁氰化钾的浓度对测定结果的影响,确定了最佳的测定条件。同时对仪器的操作参数进行了最佳选择。在最佳条件下,铅浓度在0~20μg/L范围内与荧光强度呈良好的线性关系,相关系数大于0.9995,方法的检出限为0.37μg/L。样品中铅的加标回收率在91%~102.7%之间,相对标准偏差为4.2%。     

Synthesis and properties of temperature-resistant and salt-tolerant tetra-acrylamide copolymer

Abstract

The acrylamide copolymer with acrylamide as its main monomer is a modified polyacrylamide. In addition, the acrylamide copolymer is generally to dissolve or swell in water and can be used as thickener, dispersant, flocculant and so on. Therefore, using Acrylamide AM, 2-acrylamide-2-methyl propanesulfonic acid AMPS, dimethyldodecyl (2-acrylamidoethyl) ammoniumbromide AQ₁₂ and vinyltriethoxysilane VTEO as raw materials so that a series of four-membered acrylamide copolymers are prepared in aqueous solution polymerization. The amphoteric structure in the polymer has a unique anti-polyelectrolyte behavior when it is electrically neutral, which can significantly improve the salt resistance of the aqueous polymer. In addition, the hydrolysis of the vinyltriethoxysilane containing silicon structure by hydrophobic association can improve the temperature resistance of the polymer. The optimal reaction conditions were determined by orthogonal experiment: the reaction temperature was 10?°C; the initiator concentration was 0.05?mol%; the monomer concentration was 25?wt% and the pH was 7. Properties of polymer solution indicated that the series of tetra-copolymer possessed salt-tolerant and heat-resisting performances. As an oil displacing agent, it can significantly improve the efficiency of oil displacement, and particularly highlights the effect of 4-member copolymer as an oil displacing agent.     

Ultra-lightweight cellulose foam material: preparation and properties

Ultra-lightweight cellulose foams were prepared by regeneration of sodium dodecyl sulfate (SDS)/cellulose/NaOH/urea blend solution via mechanical agitation and then freeze-drying. The morphology and properties of the blend solutions and foams were investigated via optical microscope, rheometer, BET and SEM. As a result, it was found that the inclusion complex structure between cellulose macromolecules and the solvent molecules was not destroyed. Moreover, the bubbles were about 20–50 μm in the solutions and larger (>100 μm) in the foams. Not only the micropores (bubbles) but also the nanopores could be observed in the wet and dried foams. The cellulose foams possessed ultra-low density of about 30 mg/cm³ and high specific surface area. The result of X-ray diffraction and Fourier transform infrared spectroscopy indicated that the cellulose foams were transited from cellulose I to cellulose II after dissolution and gelation. Bubbles inside the wet foams weakened the mechanical properties, but inversely increased the mechanical properties in the dried foams. Typical “J”-shaped curves were observed during the mechanical test, which revealed good compressive strength of dried foams. In this work, cellulose foams with ultra-lightweight and good mechanical properties were obtained, which exhibited great potentials for further development and comprehensive utilization of cellulose.     

Kinetics of Transesterification of Methyl Acetate and Ethanol Catalyzed by Ionic Liquid

The kinetic behavior and chemical equilibria for the transesterification of methyl acetate with ethanol to ethyl acetate and methanol catalyzed by an ionic liquid 4‐(3‐methyl‐1‐imidazolio)‐1‐butanesulfonic acid hydrogen sulfate ([HSO₃‐bmim]HSO₄) were studied experimentally. The relationship of chemical equilibrium constants versus temperature was obtained from kinetic experimental data. The effects of temperature, initial molar ratio of ethanol to methyl acetate, and catalyst concentrations were investigated. Based on the reaction mechanism, an ideal homogeneous (IH) and two nonideal homogeneous models (NIH‐1, NIH‐2) were proposed to correlate the reaction kinetic data. The activity coefficient of the catalyst was considered in NIH‐2 but not in the NIH‐1 model. The nonideal homogeneous model NIH‐1 was the best model to describe the kinetics of the transesterification reaction, and the accuracy of the reaction kinetic model is not improved by considering the effects of catalyst on the activities of the reactants and products.     

燃料电池铂钴锰合金催化剂的制备及性能

为提高PtCo/C合金催化剂的电化学性能,采用微波法合成铂钴锰催化剂前驱体,经高温热处理形成合金,最后通过酸处理得到铂钴锰合金催化剂(PtCoMn/C)。电化学测试结果表明:适量锰的添加可提升PtCo/C催化剂的活性和耐久性。PtCoMn/C催化剂在 0.9 V(vs RHE)电压下的质量比活性(MA)达到 0.666 A·mg_Pt^-1,是传统 Pt/C 的 2.66 倍,是 PtCo/C 催化剂的 1.30 倍。在30 000圈催化剂加速耐久性测试中,PtCoMn/C合金催化剂的电化学活性面积(ECSA)和质量比活性(MA)仅下降6.9%和27.1%,均远低于Pt/C催化剂。